Keeslers.com - Lowbeds, Tagalongs, Lowboys, Fixed Gooseneck Trailers, Cranes, Boom Trucks, Utility Trailers & Enclosed Trailers
Lowbeds, Tagalongs, Lowboys, Cranes, Boom Trucks, Utility Trailers & Enclosed Trailers
Prospect Park, Pa
610.534.0700 - 1.800.220.4033
Prospect Park, Pa
610.534.0700 - 1.800.220.4033
Rogers® Fixed Gooseneck Series (Model TVT25) Lowboy Trailer
Lowbed Trailer Highlights:
Long, flat gooseneck and heavy duty parking legs. Gooseneck profile easily accomodates buckets and blades. The gooseneck beams are constructed utilizing 100,000 psi minimum yield steel to maximize strength while minimizing weight. Open area in center of gooseneck provides ample room for chain and tool storage. Heavy-duty pin-type parking legs are durable and easy to use. Static capacity for the parking legs is 40,000 lbs.
Unitized frame construction. Mainbeams are fabricated utilizing 100,000 psi minimum yield steel to maximize strength and minimize weight. Ten-inch deep high strength cross members are pierced through the main beams for a lower deck height and stronger frame. Full 2" thick air-dried white oak deck is fastened to the trailer frame with bolts and cupped deck washers. The heavy-duty spring suspension provides a smooth, stable ride. Spring brakes on both axles with 4S/2M anti-lock braking system provide optimum stopping capability.
Extra-long loading ramps with 14° beavertail. Constructed from high strength steel, these ramps are heavy-duty yet light enough for ease of operation. Dual springs assist the operator lifting the ramps off the ground as well as off the deck. The ramps can be easily adjusted laterally to allow machines of various widths to be loaded. The E-Z Flip ramps are available in standard oak covered or optional ladder style.
STANDARD FEATURES:
- 86" gooseneck swing radius with 45" loaded 5th wheel height and 30 degree incline
- Ten (10) lashing D's
- Oak-covered rear loading ramps, 60" long x 22" wide constructed from high strength steel
- US-DOT approved 12 volt, rubber-mounted, sealed beam lights with weather resistant modular wiring system and SAE# J560 7-wire socket
- Corrosion resistant undercoating for trailer subframe
- Moisture cure urethane primer all other areas
- Standard Finish - RBC Red
- Seven year pro-rated limited structural warranty
AVAILABLE OPTIONS:
- Extra-heavy duty 2-speed landing gear
- Non-load bearing gooseneck fenders (splash protection only)
- Motor-grader ramps
- Full width gooseneck
- Extra lashing D's
- Hub-piloted steel or aluminum disc wheels
- 235/75R17.5 (H)16 PR low profile tires
- Ladder-style rear loading ramps, 60" long x 22" wide constructed from high strength steel
- Hydraulic powered (P.T.O.) rear loading ramps, 96" long x 39" wide
- L.E.D. light package
- Mechanical back-up warning alarm
- Additional paint colors available
REF: TVT25 - Specifications & Pricing - Request More Information
- Maximum Structural Capacity:
- 25 tons in 12'-0" of the deck
- Suspension:
- Heavy-duty multi-leaf spring
- Suspension Capacity:
- 44,800 lbs.
- Axles:
- 5" round
- Axle Capacity:
- 22,500 lb @ 60 mph
- Tires:
- 215/75R17.5 (H) 16 PR low-profile tubeless radial
- Tire Capacity:
- 18,180 lbs.
- Wheels:
- 15" cast spoke with oil bath bearings 12 1/4" x 7 1/2" drum
- Rims:
- 17.5" x 6.75" rims
- Air Brakes:
- Rising "S" cam style 4S/2M ABS with spring parking brakes
- Landing Gear:
- Heavy-duty pin type, Static load: 40,000 lb
- Empty Weight:
- 9,650 lbs.
- GVWR:
- 59,650 lbs.
- Gross Axle Weight Rating:
- 18,180 lb @ 60 mph
COMMENTS:
Designs, materials, and specifications are subject to change without notice or penalty. Capacity ratings are frame ratings only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) and/or state and federal regulations.